Crank1 Batteries for Super bikes, ATVs and JetSkis

Maintenance Free Batteries that requires no water top up and is completely spillage proof. Also get up to 20% more power, longer life and more consistent backup than compared to normal distilled water battery.

CB Series Batteries have a longer battery life due to:

  • Improved vibration resistance
  • Corrosion Prevention
  • High Pressure Plates
  • High CCA
  • Mmore capacity in Minimum space.
  • Enhanced capacity recovery.
  • Expanded grid design for superior reliability.
  • Ideal for sport bike applications.

INSTALLATION AND MAINTENANCE

  • Always connect the positive terminal firstly. DO NOT reverse polarity otherwise the electrical equipment of motorcycle will damage.
  • CAUTION- * can’t be activated due to the different performance of different vehicle. Start the engine for more times or step on gas which can more easily to activate. * Manual activation is recommend to achieve exact date recorded.
  • DO NOT over discharging the battery, charging the battery timely after discharging.
  • Dismount or disconnect the negative terminal of battery if the vehicle hasn’t been in service for long term.
  • DO NOT check the battery has power or not by short-circuit the terminal
  • Regularly check the terminal connection and the surface of terminal is clean or not to ensure well connection.
  • Storage the battery where is 5~25℃, dry, ventilated and away from direct sunlight.
  • Keep the battery at least 2m away from the heat source.
  • Regularly check and maintain the battery.

SAFE USE PRECAUTIONS

  • Do not place the battery against the side or upside down to prevent acid leakage.
  • The hydrogen will be generated during the working and discharging of battery which will cause explosion if there were fire.Please do take following precations.
  • Maintain and use the battery where is ventilate.
  • No sparks and flame when the battery is in maintenance.
  • If the battery is charging outside the vehicle which can’t be installed immediately after finish charging until laying at lease 10min to release the hydrogen generated inside the battery.
  • After riding, the battery can’t be dismounted immediately until laying for at least 10 mins.
  • During charging, the ambient temperature should not be over 45℃, otherwise cooling by water or by reducing the charging current and charging volts.
  • Do not places the metal tool or conducting matter nearby the terminal in case short-circuit the terminal.
  • DO not knock the terminal by hammer during the battery installation.
  • Be safe during carrying to prevent hitting.
Explore Batteries